Parkside PMS 160 B2, Перевод оригинальной инструкции

Страница: 8 / 28

PMS 160 B2
GB
│
IE
│
NI
│ 5 ■
5 . Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of
the power tool is maintained .
b) Always arrange for the replacement of the
plug or the power cord to be carried out by
the manufacturer of the tool or its customer
service department.
This will ensure that the
safety of the power tool is maintained .
Appliance-specific safety instructions
■ Secure the workpiece . A workpiece that is
securely held in place by a clamping device or
vice is much safer than one held in your hand .
■ Do not rest your hands next to or in front of the
appliance and the area being worked as there
is a risk of injury if you slip .
■ In the event of danger, remove the mains plug
from the socket immediately .
■ Always route the power cord towards the rear,
away from the tool .
■ RISK OF FIRE DUE TO FLYING SPARKS!
Sanding metal causes sparks . Ensure that
nobody can be put at risk and that no combus-
tible materials are located in the immediate
vicinity of where you are working .
■ Hold the power tool by the insulated gripping
surfaces, as the grinding surface could hit its
own cable.
Damage to a live wire may make
exposed metal parts of the power tool live and
could give the operator an electric shock .
WARNING! TOXIC VAPOURS!
► Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area .
WARNING! RISKS DUE TO DUST!
► When working for extended periods of time
on wood and, in particular, materials that
produce dust that is hazardous to health,
connect the tool to an appropriate external
dust extraction tool .
Wear safety goggles
and a protective dust mask!
■ Ensure sufficient ventilation when working on
plastics, paints, lacquers, etc .
■ Do not soak the materials or the area to be
processed with liquids containing solvents .
■ Never work on moistened materials or damp
surfaces .
■ Avoid sanding lead paint or other harmful
materials .
■ Do not process materials containing asbestos .
Asbestos is a known carcinogen .
■ Avoid contact with the sanding sheet while the
appliance is running .
■ Do not use the appliance without a sanding
sheet fitted .
■ Never use the appliance for purposes other
than those for which it was designed, and only
use original parts/accessories . Using attach-
ments or accessory tools other than those
recommended in the operating instructions can
lead to a risk of injury .
■ Always allow the appliance to come to a
complete standstill before putting it down .
■ The appliance must always be kept clean,
dry and free from oil or grease .