Parkside PMFS 200 B2, Оригинальное руководство пользователя

Страница: 42 / 76

GB
42
MT
a) Lung damage, if suitable respiratory
protection is not worn;
b) Cuts
c) Ear damage if working without ear
protection.
d) Eye damage if suitable eye protection
is not worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.
Assembly
Always disconnect the plug from
the mains socket before working.
Danger of electric shock.
Installing/changing the
sanding disc
The device is delivered with the orbital
sander disc ( 12) pre-installed.
Removing pre-assembled
sanding disc:
1. Remove the 4 Phillips screws
(22).
2. Remove the pre-assembled sand-
ing disc.
Position the mounting plate:
3. Position the movable mounting
plate (23) on the device:
The two threaded bores (24)
of the mounting plate must be
aligned with the markings (25) on
the device.
4. Check the correct position of the
felt ring (26).
Installing the eccentric
grinder disc:
5. Place the desired eccentric grind-
er disc (17) on the mounting plate
(23).
6. Fasten the sanding disc with the 4
Phillips screws (22).
7. Make sure that the sanding disc is
firmly in place.
Mounting the orbital sander
disc and triangular sanding
plate:
5. Insert the 4 rubber pins (27) with
the latching nose (27a) into the 4
recesses in the sanding disc (18/
12).
6. Place the desired sanding disc
(18/ 12) on the mounting
plate (23).
The rubber pins (27) fit into the
recesses of the device. Only one
position is possible.
7. Fasten the sanding disc with the 4
Phillips screws (22).
8. Make sure that the sanding disc is
firmly in place.
Attaching/removing sanding
sheet
Clean the sanding disc before you
attach a sanding sheet.