Parkside PMBA 20-Li B2, Перевод оригинальной инструкции

Страница: 12 / 163

PMBA 20-Li B2 ■ 6
│
GB
│
IE
e) Do not use a damaged or modified battery.
Damaged or modified batteries may behave
unexpectedly and cause fires, explosions or
pose a risk of injury.
f) Do not expose a battery to fire or excessively
high temperatures.
Fire or temperatures in
excess of 130°C (265°F) can cause an
explosion.
g) Follow all instructions regarding charging
and never charge the battery or the cordless
tool outside the temperature range given in
the operating instructions.
Incorrect charging
or charging outside of the permissible tempera-
ture range can destroy the battery and increase
the risk of fire.
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Protect the recharge-
able battery from heat (for example, from
continuous exposure to sunlight), fire, water
and moisture.
There is a risk of explosion.
6. Service
a)
Have your power tool serviced by a qualified
technician using only identical replacement
parts.
This will ensure that the safety of the
power tool is maintained.
b)
Never try to repair damaged batteries.
Batteries should only be maintained by the
manufacturer or an approved customer service
centre.
Additional safety instructions for
band saws
■ Hold the appliance by the insulated
gripping surfaces when performing work
where the cutting tool may come into con-
tact with hidden cables or its connecting
cable.
If the cutting tool comes into contact with
a live wire, this may make exposed metal parts
of the power tool live and could give the opera-
tor an electric shock.
■ Keep your hands out of the sawing area and
away from the saw blade.
■ Always make sure that the portable band saw
is clean before use.
■ Always stop working immediately if you notice
anything unusual.
■ Before using the tool, always ensure that all
components are properly and safely assembled.
■ Always be careful when attaching or removing
the band saw blade.
■ Always keep your hands away from the cutting
path of the band saw blade.
■ Always wait until the motor has reached full
speed before sawing.
■ Keep the handles dry, clean and free from oil
and grease. Hold the tool firmly while working.
■ Always be vigilant, especially during repetitive,
monotonous operations. Always make sure that
your hands are in the correct position in relation
to the saw blade.
■ Never remove the workpiece stop.
■ Keep away from end pieces that fall down after
sawing. They can be hot, sharp and/or heavy.
This could result in serious injury.
■ Ventilation openings often cover moving parts
and should be kept free. Loose clothing, jewel-
lery or long hair can get caught in the moving
parts.