Parkside PLLL 16 A2, Оригинальное руководство пользователя

Страница: 10 / 24

PLLL 16 A2
GB
│
IE
│ 7 ■
Switching the LED light on and off
Switching on:
♦ Plug the mains plug into an appropriate wall
socket and press the On/Off switch to the
"ON" position.
Switching off:
♦ Set the On/Off switch to "OFF" to turn off
the illuminated magnifying glass .
♦ Always remove the plug from the socket
when not in use.
♦ To protect the illuminated magnifying glass ,
fit the supplied magnifier cover .
NOTE
► Avoid touching the magnifying glass with
your fingernails or other sharp objects.
Soldering iron stand
NOTE
► During breaks in work, the soldering iron
must be placed in the soldering iron stand .
► Use only the soldering iron stand or another
fireproof surface when putting down the
soldering iron.
Third hand
CAUTION! RISK OF BURNS!
► The crocodile clips can get very hot
during use.
♦ Fold the third hand upwards.
♦ Turn the crocodile clips in the desired direc-
tion.
♦ Clamp the workpiece between the two crocodile
clips.
Soldering sponge
CAUTION!
► The hot soldering tip must never come into
contact with a dry soldering sponge .
Otherwise, the soldering sponge can be
damaged.
NOTE
► The soldering sponge is used to clean the
soldering tip.
► Dampen the soldering sponge before use.
Fitting the spindle roll
♦ Select the correct diameter of spindle roll
for the solder roll that you are using.
♦ Place the spindle roll on the solder coil mount
and guide the solder wire through one of the
three holes in the solder guide .