Parkside PHLG 2000 SE - MANUEL 2 Скачать руководство пользователя страница 4

Introduction / Safety

Hot air gun PHLG 2000 SE

For removing, reshaping, preheating,  
defrosting etc.

Introduction

L

  For your safety

   Please make sure you familiarise yourself 

fully with the way the device works before 
you use it for the first time and that you 

understand how to handle electrical power tools  
correctly. Further details can be found in the operating 
instructions. Keep these instructions in a safe place. If 
you pass the device on to anyone else, please ensure 
that you also pass on all the documentation.

L

  Proper use

The hot air gun is intended for the removal of paint, 
for warming (e.g. heat-shrinkable sleeves) and for 
reshaping and welding of plastics. It may also be used 
for detaching glued connections and for defrosting 
or thawing water pipes. It is not suitable for defrosting 
pipes made from PVC or similar materials.  
Any other use or modification to the device shall be 
considered as improper use and could give rise to 
considerable dangers. The manufacturer will not accept 
liability for loss or damage arising from improper use.  
The device is not intended for commercial use.

L

  Features and equipment

Q

  Air inlet

W

   ON / OFF switch

E

  Nozzle

R

  Heat shield

T

  Reflector nozzle

Y

  Protector nozzle

U

  Flat nozzle

I

  Reducer nozzle

L

   Included items /  

supplied accessories

1 Hot air gun PHLG 2000 SE
1 Reflector nozzle
1 Protector nozzle
1 Flat nozzle
1 Reducer nozzle
1 Operating instructions
1 Guarantee documentation

L

  Technical information

Nominal voltage: 

230 V ~ 50 Hz

Power consumption: 

 Setting 1: 1000 W  
Setting 2: 2000 W 

Air flow approx.: 

 Setting 1: 300 l / min,  
Setting 2: 500 l / min

Temperature  
Nozzle outlet approx.: 

 Setting 1: 375°C,  
Setting 2: 550°C

Protection class: 

II / 

&

Sound pressure level: 

70 dB (A)

The sound pressure level (A) of the device is typically 
less than 70 dB (A). 

L

  Safety

   Safety Information  

Specific to this Device

J

   Please ensure that only individuals over the age 

of 16 use the device in accordance with the  
operating instructions! 

   Please keep children away from  

the device. Store the device in a dry, 
closed room to which children do 

  not have access.

6  GB/IE

Содержание PHLG 2000 SE - MANUEL 2











Отзывы: