Parkside PFSA 20-Li B2, Инструкции по эксплуатации и безопасности

Страница: 19 / 144

16 GB
˜
Assembly
m
WARNING!
Always switch the product off, remove
the battery pack
[ ]
and let the
product cool down before performing
inspection, maintenance and cleaning
work!
˜
Removing the spray unit
Open the lock
[ ]
:
– Hold the motor unit
[ ]
by the handle
[ ]
.
– With the other hand, turn the spray
unit
[ 4]
firmly in a counter-clockwise
direction until the spray unit disengages
from the lock (Fig. E).
Continue turning the spray unit
[ 4]
until
you have aligned
[ 5]
with
[ ]
(Fig. D).
Pull the spray unit
[ 4]
out of the motor
unit
[ ]
(Fig. C).
˜
Fastening the spray unit
Insert the connecting tube
[ 6]
into the spray
connection
[ ]
(Fig. C).
Align
[ 5]
with
[ ]
. Turn the spray
unit
[ 4]
clockwise until it engages in the
lock
[ ]
(Fig. D).
˜
Changing/inserting the
nozzle
K
[ ]
[ ]
[ 1]
[ 3]
[ 2]
Hold the product with the nozzle head
[ ]
facing upwards before unscrewing the union
nut
[ ]
. This prevents parts from falling out.
Turn the union nut
[ ]
in a counter-clockwise
direction.
Remove the union nut
[ ]
together with the
nozzle head
[ ]
from the spray unit
[ 4]
.
If a nozzle
[ 1]
is already mounted:
– Remove the nozzle from the needle
[ 2]
.
– If necessary, lever the nozzle out carefully
with a screwdriver.
Place the desired nozzle
[ 1]
on the
needle
[ 2]
.
Place the nozzle head
[ ]
on the nozzle
[ 1]
.
Place the union nut
[ ]
on the small
thread
[ 3]
.
Tightening: Turn the union nut
[ ]
in a
clockwise direction.