Parkside PEXS 270 C3, Оригинальное руководство пользователя

Страница: 5 / 178

PEXS 270 C3 ■ 2 │
GB
│
IE
ORBITAL SANDER PEXS 270 C3
Introduction
Congratulations on the purchase of your new tool.
You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as de-
scribed and for the range of applications specified.
Please also pass these operating instructions on to
any future owner.
Intended use
This tool is intended for dry sanding wood, metal
and paintwork. Any other usage of or modification
to the tool is deemed to be improper and carries
the risk of serious personal injury. The manufacturer
accepts no responsibility for any damage attributable
to misuse. This tool is not intended for commercial
use.
Features
1
ON/OFF switch
2
Dust collector
3
Sanding pad
4
Sanding sheet
5
Speed control
6
Exhaust nozzle
7
Adapter for external vacuum extraction
8
Release button
9
Sanding sheet alignment tool
Package contents
1 orbital sander PEXS 270 C3
1 dust collector
2 sanding sheets (grain 80 + 120)
1 sanding sheet alignment tool
1 adapter for external vacuum extraction
1 set of operating instructions
Technical specifications
Nominal voltage 230 V ∼, 50 Hz (AC)
Nominal power 270 W
No-load vibration
frequency 14000–24000
rpm
Idle speed n
0
7000–12000 rpm
Sanding pad Ø 125 mm
Protection class II / (double insulation)
Noise and vibration data
Noise measurement value determined in
accordance with EN 62841. The A-rated
noise level of the power tool is typically:
Sound pressure level
L
pA
= 79 dB (A)
Uncertainty K = 3 dB
Sound power level L
WA
= 90 dB (A)
Uncertainty K = 3 dB
Wear ear muffs!
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Vibration emission value
max.
a
h, W
= 9.7 m/s 2
Uncertainty K = 1.5 m/s 2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.