Parkside PDSSE 550 A1, Перевод оригинальной инструкции

Страница: 5 / 96

PDSSE 550 A1 ■ 2 │
GB
│
IE
ELECTRIC IMPACT WRENCH
PDSSE 550 A1
Introduction
Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as
described and for the range of applications speci-
fied . Please also pass these operating instructions
on to any future owner .
Intended use
The appliance is designed for tightening and loos-
ening screws and nuts . Any other use which is not
expressly permitted in these operating instructions
may damage the appliance and represents a
serious risk for the user .
The appliance is designed for use by adults . Young
people over 16 years of age may only use the
appliance under supervision .
The manufacturer accepts no liability for damages
caused by improper use or incorrect operation of
the appliance .
Use this appliance only as described and for the
areas of applications specified . The appliance is
not intended for commercial use . Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents .
The manufacturer accepts no responsibility for
damage attributable to misuse .
Features
1
Rotational direction switch
2
Maintenance cover for carbon brushes
3
ON/OFF switch
4
Power plug
5
Tool holder
6
Spare carbon brushes
7
Sockets (17/19/21/22 mm)
Package contents
1 electric impact wrench PDSSE 550 A1
4 sockets (17/19/21/22 mm)
2 replacement carbon brushes
1 carrying case
1 set of operating instructions
Technical data
Rated power consumption 550 W
Rated voltage
230 V ∼, 50 Hz (AC)
Idle speed n
0
3700 rpm
Max . torque 500 Nm
(anticlockwise rotation)
Max . torque 100 Nm
(clockwise rotation)
Tool holder 1/2"
Protection class II / (double
insulation)
Noise emission value
Noise measurement value determined in
accordance with EN 62841 . The A-rated noise
level of the power tool is typically:
Sound pressure level
L
PA
= 91 .4 dB (A)
Uncertainty K K
KPA
= 3 dB
Sound power level L
WA
= 102 .4 dB (A)
Uncertainty K K
WA
= 3 dB
Wear ear muffs!