Parkside PDSSAP 20-Li A1, Перевод оригинальной инструкции

Страница: 49 / 75

PDSSAP 20-Li A1
GB
│
MT
│
45
■
PAP 20 A3* battery
Type LITHIUM ION
Rated voltage 20 V (DC)
Capacity 4 Ah
Cells 10 (80 Wh)
High-speed battery charger PLG 20 A3*
INPUT
Rated voltage 230–240 V ∼ 50 Hz
(AC)
Rated power
consumption 120
W
Fuse (internal) 3.15 A
T3.15A
OUTPUT
Rated voltage 21.5 V (DC)
Rated current 4.5 A
Charging time approx. 60 min
Protection class II / (double insulation)
* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise emission value
Noise measurement value determined in accor-
dance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
L
PA
= 80 dB (A)
Uncertainty K
PA
= 3 dB
Sound power level: L
WA
= 91 dB (A)
Uncertainty K
WA
= 3 dB
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Tightening screws and nuts of maximum permissible
size a
h
= 2.7 m/s 2
Uncertainty K = 1.5 m/s 2
Wear ear muffs!
NOTE
► The vibration emission values and the noise
emission values given in these instructions have
been measured in accordance with a stan-
dardised test procedure and can be used for
comparison of the power tool with another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece being worked, the
vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
► Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the power
tool is switched on but running without load).
General power
tool safety warnings
WARNING!
► Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool.
Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
IB_329780_PDSSAP20-LiA1_LB5.indb 45 07.08.20 13:57