26 GB/MT
Q
Have you understood
everything?
J
Once you have made yourself familiar with the
instructions and advice, the functioning and
handling of your device, you are finally in a
position to start work. Observing the manufac-
turer‘s instructions and advice will maximise
your safety while working with the device.
Q
Preparing for use
Take note of the mains voltage. The mains voltage
at the mains socket must match that shown on the
rating plate on the device. Devices marked with
230 V can also be operated at 220 V.
m
CAUtIon!
Make sure that the device is
switched off before you connect it to the mains
supply.
note:
Always switch on the delta sander before
bringing it into contact with the workpiece material.
Switching on the device:
j
Move the ON / OFF switch
1
forwards into
setting “I”.
Switching off the device:
j
Move the ON / OFF switch
1
backwards into
setting “0”.
Selecting the oscillation speed:
You can preselect the oscillation speed you require
using the oscillation speed setting wheel
2
. You
can also change the speed whilst you are working.
The way to determine the optimum oscillation
speed for your task is to carry out a practical test.
Setting 1 = lowest oscillation speed /
Setting max. = highest oscillation speed
Q
Vacuum dust extraction
WArnIng!
DAngEr oF FIrE!
There is
the danger of fire when working with electrical
devices that have a dust box or can be connected
to a vacuum cleaner. Under certain conditions the
wood dust in the dust extraction bag (or in the vac-
uum‘s dust bag) may ignite, e.g. as a result of flying
sparks generated when abrading metals or metal
objects left in wood. This can happen particularly if
the wood dust is mixed with paint residue or other
chemicals and the abraded particles are hot from
prolonged abrasion. Therefore you must empty the
device’s dust collection box and the vacuum clean-
er’s dust bag before taking a break or stopping
work and always avoid overheating of the abrad-
ed particles and the device.
Wear a dust mask!
WArnIng!
Always pull the mains plug is
out of the socket before doing any work on the
device.
Q
Adapter for external vacuum
extraction (with reducer piece)
Connection:
j
Push the adapter for external vacuum extrac-
tion
7
into the dust extraction spout
4
.
When doing this observe the guide markings
on the device and adapter. Turn the dust
extraction spout to lock in place.
j
If it is necessary to use the reducer piece
8
,
push the reducer piece into the adapter for
external vacuum extraction
7
.
j
Push the hose of a suitable dust extraction de
vice approved for that purpose (e.g. a work-
shop vacuum cleaner) on to the adapter for
external vacuum extraction
7
or the reducer
piece
8
.
removal:
j
Pull the hose of the dust extraction device off
the adapter for external vacuum extraction
7
.
j
Pull off the adapter for external vacuum extrac-
tion
7
(with the reducer piece
8
if used).
General Safety advice / Preparing for use
