Parkside PDRP 6.2 A1, Перевод оригинальной инструкции по эксплуатации и безопасности

Страница: 10 / 37

GB/IE/NI 10
TING DOWN THE DEVICE!
Never set the device down so
that it ends up lying on the
trigger. In the worst case, this
could cause the device to switch
itself back on accidentally, which
could result in a dangerous
situation.
z „
The compressed air source must
have a filter and regulator. Dust,
corrosive fumes and/or moisture
can result in damage to the motor
in a pneumatic tool.
z „
The tool and intake hose must be
fitted with a hose coupling, so as
to ensure that pressure is com-
pletely discharged when the cou-
pling hose is disconnected.
z „
DANGER! Avoid contact
with a supply line that is carrying
live current. This device provides
no insulation against electric
shock.
z „
DANGER OF INJURY!
High working pressures can
produce powerful recoil forces
that can in some circumstances
create hazards due to continuous
stress and strain.
z „
If you do not have experience
with using the device, you should
seek training to ensure you can
use it safely.
z „
DANGER!
Keep hands and
other parts of the body away from
rotating parts Otherwise there is a
risk of injury.
z „
TAKE PUNCTURE INJU-
RIES SERIOUSLY!
Do not treat an injury from a jet as
a harmless cut. A high-pressure jet
can ‘inject’ poisons into the body,
which can result in serious inju-
ries. Accordingly, seek immediate
medical attention for any skin
injury caused by a jet.
z „
The pneumatic device must not be
modified in any way without the
manufacturer’s permission.
z „
Always disconnect the pneumatic
device from the air supply after
use and when the device is not in
use.
z „
Never use any pneumatic device
if it is not air-tight or is waiting to
be repaired.
z „
Ensure that your work area is
clean and well illuminated. Untidi-
ness and poorly lit work areas can
cause accidents to happen. This
makes it easier for you to control
the pneumatic device – especially
if something unexpected happens.
z „
Ensure that device repairs
always use original replacement
parts and are performed by a
qualified technician. This ensures
that the device is safe to operate
at all times.
z „
Keep children and other persons
Safety instructions for pneumatic tools