Parkside PAT 4 D5, Перевод оригинальной инструкции

Страница: 20 / 146

20 GB
Set the On / Off switch
8
to the “0“ position to switch the
product off.
Note: Hold tool firmly and press on work surface before firing to
ensure the complete penetration of the staple / nail.
Clearing Jammed Staples
If a staple is jammed, do not squeeze the trigger
1
.
It may otherwise accidentally be triggered after removing the staple.
Note: Set the On / Off switch
8
to “0“ position prior to clearing the
jammed staple.
Open the magazine
4
and pull back on the pusher
3
.
Remove the jammed staple from the magazine
4
.
Note: Do not trigger the staple gun when empty to prevent wear.
Determining the Staple Length
Consider two factors when determining the correct staple length:
- the thickness of the material being fastened
- the composition (hardness) of the material being fastened.
4–6 mm staple or 6–8 mm nail in length will typically suffice when
driving into plywood and fiber board.
8–12 mm staple or 10 mm nail in length will typically suffice when
fastening into softwood such as pinewood.