Parkside PAT 12 B2, Перевод оригинальной инструкции по эксплуатации и безопасности

Страница: 20 / 75

18 GB
If the impact force is set correctly, the crown
of the staple or head of the nail is flush with
the fastened material.
˜
Clearing jammed staples/nails
m
WARNING!
If a staple or nail is jammed, do not
pull the trigger
[ 3]
! Staples or nails may
otherwise be triggered accidentally by the
product after removing the staples or nails.
Remove the battery pack
[ 5]
from the
product before clearing the jammed
staples or nails.
Open the magazine
[ 8]
by pulling the push
rod
[ 9]
from the product.
Remove the jammed staples/nails from the
magazine
[ 8]
.
˜
Checking the battery level
(Fig. G)
Press down the safety contact
[ ]
onto a hard
surface. The remaining energy level is shown
on the LEDs of the battery level indicator
[ 2]
.
LEDs Battery level
Red below 30 %
Red and orange 30–70 %
Red, orange and green above 70 %
NOTE
u
When the battery level is below 30 %:
Charge the battery pack
[ 5]
.
˜
Belt clip
The belt clip
[ 6]
allows the product to be hooked
on a belt or pocket.
˜
Cleaning and care
m
WARNING!
Remove the battery pack
[ 5]
and
let the product cool down before
performing inspection, maintenance
and cleaning work!
Never allow fluids to get into the product.
The product must always be kept clean, dry
and free from oil or grease. Remove debris
from the product after each use and before
storage.
Regular and proper cleaning will help ensure
safe use and prolong the life of the product.
Clean the product with a dry cloth. Use a soft
brush for areas that are hard to reach.
NOTE
u
Do not use chemical, alkaline, abrasive or
other aggressive detergents or disinfectants
to clean this product as they might be
harmful to its surfaces.