Parkside PAS 4 B2, Перевод оригинальной инструкции

Страница: 12 / 29

■ 8 │
GB
│
IE
│
NI
PAS 4 B2
Changing bits/screw driver bits
(see fig . D)
Inserting:
♦ Insert the bit into the tool holder .
Removal:
♦ Pull the bit out of the tool holder .
Replacing the cutting blade
(see figs . E + F)
NOTE
► Before carrying out any work on the
appliance, ensure that the rotation direction
switch is in the middle . This prevents
unintentional switching on .
♦ Start by connecting the cutting attachment
to the appliance . This blocks the motor spindle
and allows the screw to be removed .
♦ Unscrew the screw (I) .
♦ Remove the cutting blade (II) by pulling it
downwards .
♦ Push in a new cutting blade (II) from below
ensuring that the ground edge of the blade
faces you .
Turn around the blade (II) until it fits onto the
tool fitting (III) .
♦ Tighten the screw (I) .
♦ The attachment can now be used again .
CAUTION!
► There is an arrow ( ) on the blade guard
of the cutting attachment. This shows you
the recommended running direction of the
cutting blade.
Operation
Switching the cordless screwdriver
on/off
Switching on:
♦ To start the appliance, press the ON/OFF
switch and keep it pressed in .
Switching off:
♦ Release the ON/OFF switch to switch off the
appliance .
Changing the direction of rotation
Clockwise:
♦ Push the rotation direction switch to the left .
♦ Press the ON/OFF switch . The clockwise
rotation indicator lights up . You can now
screw in the screws .
Anti-clockwise:
♦ Push the rotation direction switch to the right .
♦ Press the ON/OFF switch . The anticlockwise
rotation indicator lights up . You can now
unscrew the screws .
Safety lock-out:
♦ Push the rotation direction switch into the
middle position . The ON/OFF switch is
blocked .
NOTE
► When the ON/OFF switch is locked it is
still possible to activate the LED lamps .
To do this, press the ON/OFF switch .
Tips and tricks
Screw bits are labelled according to their dimen-
sions and their shape . If you are unsure, always try
the particular screw bit out to see whether it sits in
the screw head without any free play .