Parkside PAEXS 20-Li A1, Перевод оригинальной инструкции

Страница: 13 / 47

PAEXS 20-Li A1
GB
│
CY
│ 9 ■
Dust box
Connecting
♦ Slide the dust box onto the appliance as far
as the stop .
Removal
♦ Pull the dust box off the appliance .
NOTE
► To achieve optimum dust extraction, the dust
box should be emptied regularly .
♦ To do this, remove the dust box from the
appliance as described above . Open the dust
box by pulling on the tab and then removing
the lid . Clean both parts thoroughly by tapping .
Reducer
Connecting
♦ Push the reducer for external extraction appli-
ances into the adapter fitting .
♦ Push the hose from a suitable dust extraction
appliance (e .g . a workshop vacuum cleaner)
onto the reducer for external extraction appli-
ances
.
Removal
♦ Pull the hose of the vacuum cleaner off the re-
ducer for external extraction appliances
.
♦ Remove the reducer .
Use
NOTE
► Always switch on the appliance before contact
with the material and then apply the tool to the
workpiece .
Adjusting the additional handle
You can adjust the additional handle to several
different positions .
♦ To reposition the additional handle undo
the screw .
♦ Move the additional handle to the required
position .
♦ Retighten the screw .
Switching on and off
Switching the appliance on
♦ Move the ON/OFF switch to the "I" position .
Switching the appliance off
♦ Move the ON/OFF switch to the "0" position .
Setting the rotational speed
♦ Adjust the speed setting wheel to a position
between 1 and 6 .
Working procedures
■ Switch the appliance on before applying it to
the workpiece .
■ Apply minimal pressure when working .
■ Work at a constant speed .
■ Change the sanding sheets regularly .
■ Never use the same sanding sheet for sanding
different materials (e .g . wood followed by
metal) . Optimum sanding results can only be
achieved by using clean sanding sheets .