Parkside PAAS 12 A2, Руководство пользователя

Страница: 41 / 62

■ 36 │
GB
│
MT
PAAS 12 A2
Before use
Charging the battery pack
CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect
the battery pack to the high-speed battery
charger .
NOTE
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C .
♦ Connect the battery pack to the high-speed
battery charger .
♦ Insert the power plug into the socket . The
control LED
lights up red .
♦ The green control LED indicates that the
charging process is complete and the battery
pack is ready for use .
♦ Push the battery pack back into the appli-
ance .
♦ You should always switch the high-speed
charger
off for at least 15 minutes between
successive charging processes . Also disconnect
the power plug from the mains power socket .
Attaching/disconnecting the battery
pack to/from the appliance
Attaching the battery pack
♦ Click the battery pack into the handle .
Removing the battery pack
♦ Press the release buttons and remove the
battery pack .
Checking the battery charge level
♦ Press the safety lock-out and the ON/
OFF switch to check the charge level of the
battery . The status/remaining charge will be
shown on the battery charge level display
as follows:
RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Attaching/removing the grip bracket
NOTE
► The grip bracket cannot be attached/
removed while the saw blade is attached .
Attaching the grip bracket (see fig. A–C)
♦ Push the grip bracket over the guides on the
base plate and onto the appliance .
Removing the grip bracket
♦ Press the release and pull the grip
bracket forwards out of the guides .