Parkside PAAP 12 A1, Оригинальное руководство пользователя

Страница: 14 / 35

PAAP 12 A1 ■ 10 │
GB
│
IE
│
NI
│
CY
Use
NOTE
► Always switch the hand grinder on before
applying it to the workpiece .
Switching the appliance on:
♦ Press the safety lock-out on the side with the
symbol to unlock the ON/OFF switch .
♦ Press the ON/OFF switch .
Switching the appliance off:
♦ Release the ON/OFF switch .
♦ Press the safety lock-out on the side with
the symbol to lock the ON/OFF switch .
2-speed gearbox
CAUTION!
► Operate the speed selector switch only
when the appliance is at a standstill . Other-
wise the appliance can be damaged .
In first gear (speed selector switch in
position: 1)
you can reach a speed of approx . 2800 rpm .
In second gear (speed selector switch in
position: 2)
you can reach a speed of approx . 8300 rpm .
Grinding
WARNING!
► Dust from materials such as paints, some types
of wood and metal can be harmful to health .
► Contact with or inhalation of these dusts can
represent a health hazard for the person
operating the appliance and any other
people in the vicinity .
► Wear safety goggles and a protective dust
mask!
NOTE
► Make sure that a suitable sandpaper is
correctly fitted on the polishing disc .
♦ Switch the appliance on .
♦ Guide the appliance across the workpiece
parallel to its surface .
♦ Move the unit parallel and evenly over the
surface to be sanded .
♦ Do not press the appliance down . Pressing
down hard does not improve the performance .
♦ When you are satisfied with the result, turn off
the appliance .
Polishing
♦ Add a little polish to the fitted polishing attach-
ment , and the workpiece .
–
Polishing hood (orange) for pre-polishing
–
Polishing hood (black) for final polishing
–
Fake fur attachment for high-gloss polishing
♦ Manually spread the polish over the surface
you want to polish .
NOTE
► Do not apply the polish to the same surface
too often as the particles it contains could
damage the finish .
► Mask any plastic components beforehand as
these could be faded by the polish .
♦ Switch the appliance on .
♦ Guide the appliance across the workpiece
parallel to its surface .
♦ Move the appliance parallel and evenly over
the surface being polished .
♦ Do not press the appliance down . Pressing
down hard does not improve the performance .
♦ When you are satisfied with the result, turn off
the appliance .
ATTENTION!
► Depending on the size and nature of the
workpiece, suitable safety precautions must
be taken . Use suitable clamps to prevent the
workpiece from slipping .