Parkside PAA 20-Li B2, Перевод оригинальной инструкции

Страница: 11 / 136

PAA 20-Li B2
■ 6 │
GB
│
IE
Charging/operating a USB device (see fig . C)
NOTE
► If only a small current (<130mA) is drawn, the battery adapter
switches off after a short time .
It is therefore not possible to charge or operate such a device .
♦ Connect your USB device to the USB port of the battery
adapter .
♦ Press the ON/OFF switch to activate the battery adapter .
The control LED flashes four times and then lights up . The con-
trol LED lights up permanently to indicate the power supply .
Your device can now be charged or operated on the battery
adapter .
♦ To turn off the USB port , press the ON/OFF switch again
for around two seconds .
The control LED goes out after a short time .
♦ If you are no longer using or charging your device, disconnect it
from the battery adapter .
Use belt clip
■ With the belt clip you can use the battery adapter z . B .
attach to a belt or the like .