9
GB
or the relevant service centre.
· Do not operate the device if it is damp and do
not use it in a damp environment.
· If you use the device outdoors, always connect
it through a residual current device with a
maximum trip current of 30 mA. If using an ex-
tension lead, always use one that is approved
for outdoor use.
· Always keep the mains lead out of the operat-
ing area and run it away from the rear of the
device.
To avoid the danger of injury:
Danger of burns!
Do not touch the heated
soldering tip. You could suffer burn injuries.
· Before carrying out any work on the device
itself, for example, changing the soldering tip,
always pull the plug out of the mains socket
and allow the device to cool.
·
Always wear protective glasses
when using the device. In
addition, it is recommended that you wear protec-
tive gloves, a face mask and a protective apron.
· Before use, always check the device, mains
lead and plug for any damage. If any parts are
damaged, have them fixed or replaced at a
specialist repair centre only.
· Ensure that no vapours that may be hazardous
to health can accumulate when working with
the device for long periods. Always provide
adequate ventilation of your working area.
· Switch on the device each time before you
bring it into contact with the materials to be
soldered.
Using the device safely:
· Before heating the device, check that the
soldering tip is firmly seated - the clamping
Safety
Manual_UK_Inhalt.indd 9
14.11.2005 9:27:17 Uhr
