Parkside 404705 2107, Инструкции по эксплуатации и безопасности

Страница: 19 / 57

17 GB/IE/NI
NOTE
u
The cloth filter bag
[ 20]
and the paper filter
bag
[ 22]
are suitable for dry vacuuming
only .
u
Do not use the cloth filter bag
[ 20]
for
vacuuming very fine dust or dirt (e .g .
sanding dust) . The cloth filter bag can be
used for many other materials though .
Cloth filter bag
[ 20]
(dry vacuuming)
Fig . L
Turn the container lid
[ 2]
over .
Install the cloth filter bag
[ 20]
to the filter
basket
[ 2b]
.
Pull down the rim of the cloth filter bag
[ 20]
until it covers the filter basket
[ 2b]
completely .
The rim of the cloth filter bag must reach and
touch the bottom surface of the filter basket .
Paper filter bag
[ 22]
(dry vacuuming)
Fig . M
Turn the container lid
[ 2]
over .
Align the hole of the paper filter bag
[ 22]
with
the internal suction connector
[ 9a]
.
Press down the paper filter bag
[ 22]
to insert
the internal suction connector
[ 9a]
into the hole
of the paper filter bag .
Press down the paper bag
[ 22]
until the seal
ring
[ 22a]
is fitted into the circular slot
[ 9b]
.
Foam filter
[ 21]
(wet vacuuming)
Fig . N
Turn the container lid
[ 2]
over .
Install the foam filter
[ 21]
to the filter
basket
[ 2b]
.
Gently and slowly pull down the rim of
the foam filter
[ 21]
until it covers the filter
basket
[ 2b]
completely . The rim of the foam
filter must reach and touch the bottom surface
of the filter basket .
˜
Operation
˜
Switching on/off
NOTE
u
Before use, check if all parts are connected
securely and the container lid
[ 2]
is locked
in place .
u
Before you connect the product to the
power supply, make sure it is switched off .
Fig . A
Connect the power plug
[ 13]
with a suitable
socket-outlet .
Switching on:
Press the on/off switch
[ 5]
to position I .
Switching off:
Press the on/off switch
[ 5]
to position 0 .
˜
Storing the nozzles
Fig . O
Slide one end of the straight nozzle / extension
tube
[ 17]
or the crevice nozzle
[ 19]
into the nozzle
holder on one of the swivel castors
[ 10]
or into one
of the nozzle holders
[ 15]
on the container lid
[ 2]
.
˜
Wrapping up the power cord
Fig . P
Wrap up the power cord
[ 11]
around the
upper hook of the power cord holder
[ 3]
and the lower swivel hook of the power cord
holder
[ 7]
.
Fixing the power plug
[ 13]
: Connect the
power cord clip
[ 12]
to the wrapped up power
cord
[ 11]
.