Parkside 385125 2107, Инструкции по эксплуатации и безопасности

Страница: 20 / 55

19 GB/IE/NI
˜
Supplementary notes
Approved cutting disc designs
Diamond-coated, disc diameter 89 mm, disc
thickness max. 1.8 mm
Always wear a dust mask!
Always wear ear muffs!
Original accessories/auxiliary
equipment
Use only the accessories and additional
equipment that are specified in the operating
instructions and are compatible with the
appliance.
Cutting saw blade (symbols)
m WARNING!
Wear ear muffs!
Wear safety goggles!
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding!
Approved diameter of tools
Not approved for side grinding
˜
Safety instructions for
grinding tools
a)
General
Grinding tools are susceptible to breakage;
therefore extreme care is required when
handling grinding tools. Using damaged,
incorrectly clamped or incorrectly installed
grinding discs is dangerous and may cause
serious injury.
b)
Handling, transport and storage
Grinding tools are to be treated with care
and transported carefully. Grinding tools
should be stored in such a way that they
are not exposed to mechanical damage or
harmful environmental influences.
Avoid any risk of an electric shock!
Check the condition of the appliance,
power cord and plug regularly. Stop using
appliances if any of the aforementioned parts
are damaged. Never open the appliance.
Damaged appliances, power cords or power
plugs cause danger to life by electric shock.
Have repairs and replacement work done
only by the Service centre or a qualified
electrician.
Do not operate the appliance if it is damp or
in a humid environment.
When working outdoors, connect the
appliance via a fault current circuit breaker
with a maximum tripping current of 30 mA.
Use only an extension cord approved for
outdoor use.
NOTE
u
Always hold the power cord away from the
working area of the appliance and run it to
the rear away from the appliance.