Parkside 384512 2107, Перевод оригинальной инструкции

Страница: 42 / 64

PBH 1050 C3
GB
│
MT
│ 39 ■
Technical data
Rated power consumption 1050 W
Rated voltage
230 V ∼, 50 Hz (AC)
Rated idling speed n
0
0–980 rpm
Stroke rate 0–5300 bpm
Impact energy 3 J
Max. drill diameter 13 mm for steel
32 mm for wood
26 mm for concrete
Diameter drill chuck 2–13 mm
Protection class II / (double insula-
tion)
Meaning Symbol
Concrete
Masonry
Steel
Wood
Core cutter
Noise emission value
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Hammer drilling
Sound pressure level L
pA
= 90 dB (A)
Uncertainty K = 3 dB
Sound power level L
WA
= 101 dB (A)
Uncertainty K = 3 dB
Chiselling
Sound pressure level L
pA
= 93 dB (A)
Uncertainty K K = 3 dB
Sound power level L
WA
= 104 dB (A)
Uncertainty K = 3 dB
Wear hearing protection!
Total vibration value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Hammer drilling
in concrete
a
h(HD)
= 13.7 m/s 2 , K = 1.5 m/s 2
Chiselling a
h(CHeq)
= 15.0 m/s 2 , K = 1.5 m/s 2
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
► The vibration level will vary according to the
use of the power tool and may sometimes be
higher than the value specified in these
instructions. Regular use of the power tool in
this way may cause the user to underestimate
the vibration. Try to keep the vibration loads
as low as possible. Measures to reduce the
vibration load are, e.g. wearing gloves and
limiting the working time. Wherein all states
of operation must be included (e.g. times when
the power tool is switched off and times where
the power tool is switched on but running
without load).