Parkside 382538 2110, Перевод оригинальной инструкции

Страница: 45 / 62

PNS 300 B3 ■ 42 │
GB
│
MT
Before use
WARNING!
► Switch the appliance off and remove the
power plug before starting any work on the
appliance.
Changing tools
Your appliance has a fully automatic spindle
lock
.
When the motor is stopped, the power train
locks so that the chuck can be opened by
turning it
. After you have attached the desired
tool and tightened it by turning the chuck , you
can continue working. The spindle lock is automati-
cally released when the motor starts (ON/OFF
switch pressed).
Torque preselection/selecting the
operating mode
You can adjust the torque on the torque selection
ring and select the drill setting .
♦ Select a low level for small screws or soft
materials.
♦ Select a high level for large screws, hard mate-
rials or removing screws.
♦ Select the drill setting for drilling work by
adjusting the torque selection ring to the
position .
2-speed gearbox
CAUTION!
► Operate the speed selector switch only
when the appliance is at a standstill. Other-
wise, the appliance could be damaged.
In first gear
(speed selector switch
in position: 1)
you can reach a speed of approx. 400 rpm and a
high torque. This setting is suitable for all screwing
jobs.
In second gear
(speed selector switch
in position: 2)
you can reach a speed of approx. 1600 rpm for
carrying out drilling work.
Removing the chuck
If you want to use the bit holder , you must
remove the chuck .
Removing the chuck
♦ Hold the chuck firmly from the front.
♦ Pull/push the chuck ring in the direction of
the chuck .
The chuck is now unlocked and can be
removed towards the front.
Attaching the quick-release chuck
♦ To replace the chuck , pull the chuck ring
towards the quick-release chuck and push the
chuck fully on.
NOTE
► If the chuck does not automatically click
into place, turn the chuck ring .
Using the bit holder
After removing the chuck you can use the bit
holder .
♦ Insert a suitable bit into the bit holder .
♦ Push the bit into the bit holder as far as the
stop.
The guidance and the magnetic holder keep the
bit firmly in place.
♦ To remove the bit, pull it out of the bit holder .