Parkside 380862-2110, Перевод оригинальной инструкции

Страница: 18 / 240

PAFS 550 A1
GB
│
IE
│ 13 ■
♦ Release the trigger
9
as soon as the cleaning
fluid starts flowing out.
♦ Lock the paint spray gun
7
by turning the safety
catch
6
with the tip as far back and up as
possible.
♦ Turn the function switch
e
to the vertical posi-
tion (PRIME).
♦ Unlock the paint spray gun 7 by turning the
safety catch
6
so that its tip is facing down.
♦ Drain off the remaining paint by pulling the
trigger
9 . Hold the paint spray gun 7 over the
detergent container while doing so.
♦ Release the trigger
9
as soon as clear cleaning
fluid starts flowing out.
♦ Make sure that no detergent residue remains in
the appliance. If necessary, rinse it again with
water.
♦ Lock the paint spray gun
7
by turning the safety
catch
6
with the tip as far back and up as
possible.
♦ Turn the pressure regulator dial
3
to position
0 (off). Remove the plug from the mains socket.
♦ Depressurise the appliance.
♦ Remove the high-pressure hose
w
from the
paint spray gun 7 with the aid of an adjustable
spanner.
♦ Disassemble the nozzle holder
a
along with
the nozzle 5 , saddle washer o and plastic
ring
i
(see fig. F). Clean all parts thoroughly
using suitable cleaning agents.
♦ Lock the paint spray gun 7 by turning the safety
catch 6 with the tip as far back and up as
possible.
NOTE
► Clean the HEA filters q regularly. Replace
them if cleaning is no longer sufficient.
♦ Disconnect the suction hose
2
and the return
hose
1
from the appliance using the hose
clips l . Clean the outsides of the hoses.
♦ Remove the filter plate
u
of the intake filter
t
(see fig. E).
♦ Clean the filter plate
u
thoroughly under
running water.
♦ Remove the high-pressure hose
w
from the
connecting thread
r
using an adjustable
spanner. Counter the connection thread
r
using a second adjustable spanner.
♦ Dip the inlet valve
h
into a container filled with
approx. 250 ml of conservation agent (a fine,
acid- and resin-free oil, e.g. Shell Corena
S2 P 68/P 100/P 150) so that it can be sucked
in (see fig. M).
♦ Insert the plug into a mains power socket.
♦ Turn the function switch
e
to the vertical posi-
tion (PRIME).
♦ Hold a cloth in front of the connecting thread r
(see fig. N). Turn the pressure regulator dial
3
to position 1 for about 30–60 seconds. This
helps to preserve the appliance. The oil is
discharged again through the outlet of the
return hose
1 . Turn the pressure regulator
dial
3
to position 0 (off).
♦ Remove the plug from the mains socket.
♦ Then dismantle the paint spray gun
7
and
remove the HEA filter
q
in the handle
8
. If
necessary, clean all of the components of the
spray gun again using a brush. Oil all of the
parts with a fine, acid- and resin-free oil, and
store the oiled parts in a dust-proof location.
♦ Before using the appliance again, rinse it
thoroughly with warm water to remove any
oil residues.