Parkside 354869_2007, Перевод оригинальной инструкции

Страница: 10 / 40

PSBM 1100 B1 GB
│
IE
│
NI
│
CY
│
7 ■
♦ If necessary, use the reducer by pushing it
onto the dust extraction adapter .
♦ Switch the dust extractor on when making drill
holes.
♦ To detach the extractor, follow the above steps
in reverse order.
Operation
Select operating mode
Function selector switch
♦ Move the function selector switch so that the
required symbol engages:
Function Symbol
Drilling
Impact drilling
Select direction of rotation
WARNING!
► The rotation direction switch may only be
used/adjusted if the device is at a standstill.
♦ Select the direction of rotation by pressing the
rotation direction switch towards the left or
right.
2-speed gearbox
CAUTION!
► Operate the speed selector only when
the appliance is at a standstill. Otherwise,
the appliance can be damaged. If it is not
possible to move the selector, briefly press
the ON/OFF switch and then try again.
► Press the speed selector only
in the lower half of the dial!
Turn
the speed selector so that the
required gear engages at the
marking.
In first gear
(speed selector switch in position 1)
This setting is suitable for light drilling, pre-drilling,
work using a large-diameter drill, and the use of
accessories.
In second gear
(speed selector switch in position 2)
This setting is suitable for carrying out drilling work
with a small-diameter drill.
Preselecting the rotation speed
You can use the rotational speed preselector
adjusting wheel to preselect the rotational
speed. The speed you select depends on the mate-
rial to be processed. Work out the correct settings
by carrying out a test.
NOTE
► The appliance only reaches the set rotational
speed during continuous operation.
Switching on and off
Switching the appliance on
♦ Press the ON/OFF switch .
Switching the device off
♦ Release the ON/OFF switch .
Switching to continuous operation
♦ Press the ON/OFF switch . Lock it in the
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation
♦ Press the ON/OFF switch and release it
again.
IB_354869_PSBM1100B1_GB_IE_NI_CY.indb 7 03.12.20 09:01