Parkside 346166 2004, Оригинальное руководство пользователя

Страница: 49 / 75

PAT 20-Li A1 GB
│
MT
│
45 ■
Charger PLG 20 A1*
INPUT
Rated voltage 230–240 V ∼, 50 Hz
(AC)
Rated power consumption 65 W
Fuse (internal) 3.15 A
OUTPUT
Rated voltage 21.5 V (DC)
Rated current 2.4 A
Charging time approx. 60 min
Protection class II / (double insulation)
Wire staples
Type 55
15–25 mm
Staple width 6 mm
Staple length 15–25 mm
Type 47
15, 20, 25,
32 mm
Nail length 15, 20, 25, 32 mm
* BATTERY AND CHARGER ARE NOT INCLUDED
Noise emission value
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
L
pA
= 84.1 dB (A)
Uncertainty K
pA
= 3 dB
Sound power level L
WA
= 95.1 dB (A)
Uncertainty K
WA
= 3 dB
Wear hearing protection!
Total vibration value
Vibration values determined in accordance with
EN 60745:
Vibration emission value
a
h,W
= 3.65 m/s 2
Uncertainty K = 1.5 m/s 2
NOTE
► The vibration emission value specified in
these instructions has been measured in
accordance with a standardised measuring
procedure and can be used to make equip-
ment comparisons. The specified vibration
emission value can also be used to make an
initial exposure estimate.
WARNING!
► The vibration emission value varies in accord-
ance with the use of the power tool and may
be higher than the value specified in these
instructions in some cases. Regular use of the
power tool in such a way may cause the user
to underestimate the vibration. Try to keep the
vibration loads as low as possible. Examples
of measures for reducing the vibration load
are wearing gloves when using the tool and
limiting the working time. Wherein all states
of operation must be included (e.g. times
when the power tool is switched off and times
where the power tool is switched on but
running without load).
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.