9
GB/IE/NI
Use the included screws
4
and
rawlplugs
5
. These are only
suitable when mounting to brick,
concrete- or wooden walls.
Please use suitable screws and
rawlplugs when mounting to
other materials. Consult your re-
tailer for rawlplugs and screws
suitable for the respective wall.
Note:
To prevent backflow, do
not mount the hose holder
7
higher than the tap, or install a
backflow preventer or stop cock
between the tap and hose
6
.
For mobile use, the spray head
1
and the hose connections
can be inserted into the brackets
on the left and right.
Attention:
For wall installation,
hang the spray head as shown
in Fig. D.
Use
Connecting
Connect the hose
6
as shown
in Figure B.
Using the adapter
Rotate the tap connector
2a
clockwise onto the connection
thread of the tap.
The adapter
2b
must be used for
a ½ (12.7 mm) connection
thread.
Rotate the adapter
2b
clockwise
into the tap connector
2a
.
Using the spray nozzle
Note:
the spray nozzle
1
features
ten different spray patterns. The flow
rate is variable.
Insert the spray nozzle
1
in the
hose connector with water stop
3
(cf. Fig. C).
Move the trigger switch
1a
to
the back to start water flow and
for variable adjustment (cf. Fig. D).
Turn the wheel
1b
to position „ ”,
to select or adjust the spray pat-
tern (cf. Fig. D). You can choose
between ten different settings: jet
stream, shower spray, fan spray,
central spray, soaker spray, verti-
cal spray, scattered spray, mist,
flat spray, cone spray.
