Parkside 331789 1910, Перевод оригинальной инструкции

Страница: 7 / 98

PWSA 20-Li B3 ■ 2
│
GB
│
IE
│
NI
CORDLESS ANGLE GRINDER
PWSA 20-Li B3
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The appliance is intended for cutting, rough cutting
and brushing metal, concrete or tiles without the
use of water. Any other usage or modification of
the appliance is deemed to be improper and carries
a significant risk of accidents. The manufacturer
accepts no responsibility for damage(s) resulting
from improper usage. The appliance is not intended
for commercial use.
Explanation of the symbols used:
Before using the appliance for the
first time, read the original operating
instructions and safety instructions.
The use of damaged cutting or polish-
ing discs is dangerous and can lead
to serious injuries!
Diameter of the disc
Cordless angle grinder
Wear protective goggles!
Wear ear muffs!
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding
Not approved for side grinding
Suitable for grinding metal
Features
ON/OFF switch
Release button for the battery pack
Battery pack*
Battery charge level button
Battery display LED
Adjusting wheel for speed pre-selection
Additional handle
Blade guard
Spindle locking button
Screw thread (3 x) for the additional handle
Mounting ring
Screws
Blade guard fixture
High-speed charger (see fig. A)*
Red charge control LED (see fig. A)
Green charge control LED (see fig. A)
Attachment spindle (see fig. C)
Attachment flange (see fig. C)
Clamping nut (see fig. C)
Two-hole mounting spanner (see fig. D)
Bulges