Parkside 327368 1904, Перевод оригинальной инструкции

Страница: 12 / 48

PMTS 180 A1 GB
│
MT
│
9 ■
Metal cut-off grinder
WARNING! TOXIC FUMES!
► Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area.
Original accessories/auxiliary
equipment
■ Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.
Before use
Setting up the appliance
Fix the appliance using suitable bolts (not included
in delivery) to a flat, stable base. Use the drill holes
for this purpose. Ensure that a mains socket is
within easy reach.
NOTE
► In exceptional cases you can position the
baseplate for this process on a solid support.
Removing / inserting transport
safety devices
Removing transport safety devices
♦ Apply a little pressure to the handle and pull
the transport safety device out. The motor
unit can now be moved upwards.
Inserting transport safety devices
♦ Press the handle downwards and push the
transport safety device into the appliance.
The motor unit is now fixed.
NOTE
► Use the transport safety device for transport-
ing the appliance. Carry the appliance by its
integrated carrying handle
14a
.
Operation
Switching on and off
■ Direction of rotation of the tool!
■ Insert the plug into a mains power socket.
Switching on:
♦ Press the ON/OFF switch and keep it
pressed.
Switching off:
♦ Release the ON/OFF switch .
Setting the cutting depth
WARNING! RISK OF INJURY!
► Always remove the power plug from the
wall socket before carrying out any work on
the appliance.
♦ Adjust the screw on the cutting depth adjust-
ment with the aid of the supplied hex key
(small) .
♦ Test the cutting depth by lowering the motor
unit.
Changing the cutting disc
WARNING! RISK OF INJURY!
► Always remove the power plug from the
wall socket before carrying out any work on
the appliance.
► Allow the cutting disc to cool down
before you touch it
► Check the cutting disc . It should not be
damaged or damp, and it should have no
cracks. Otherwise, it could break during
use and cause injuries.
NOTE
► Only use cutting disks which comply with the
performance data stated in this manual.
♦ Undo the mounting screws using the sup-
plied hex key (small) , in order to remove the
protective cover .
♦ Swing the pendulum cover back completely
and hold it firmly in place with your hand.