Parkside 315116, Руководство по эксплуатации и технике безопасности

Страница: 18 / 56

14 GB/IE/NI
16 Troubleshooting
Problem Possible cause Remedy
The engine does not start Incorrect start-up process Follow the instructions regarding starting.
The engine starts but does
not run at full power Contaminated air filter (33) Clean the air filter (33)
The engine does not run
smoothly Incorrect spark plug gap Clean the spark plug and adjust the spark plug gap or
replace the spark plug
Soot deposits or wetness
on the spark plug Incorrect carburettor adjustment Have the carburetor adjusted and, if necessary, clean
the spark plug or replace it with a new one.
Service information
Please note that the following parts of this product are sub-
ject to normal or natural wear and that the following parts are
therefore also required for use as consumables.
Wear parts*: Chain, Guide bar, Chain sprocket, Chain oil, En-
gine oil, Claw Stop, Chain catch, spark plug, air filter, fuel filter,
chain oil filter
* Not necessarily included in the scope of delivery!
14 Storage
• Always use the cover for the guide rail (27) during storage.
• Always clean and maintain the appliance before storage,
see section “Cleaning and maintenance”.
• Switch off the chainsaw before moving it anywhere, even
short distances. Protect the machine during transport (also in
vehicles) against tipping over to prevent fuel loss, damage
or injuries.
• Empty the oil and fuel tanks using a suction pump.
m
WARNING!
Do not remove the fuel in enclosed rooms, in the vicinity of fire
or while smoking. Gas vapours can cause explosions or fire.
• Start the engine and leave it running until the remaining pet-
rol has been used up.
15 Disposal and recycling
The equipment is supplied in packaging to prevent it from be-
ing damaged in transit. The raw materials in this packaging
can be reused or recycled.
The equipment and its accessories are made of various types
of material, such as metal and plastic. Defective components
must be disposed of as special waste. Ask your dealer or your
local council.
The packaging is wholly composed of environment-
ally-friendly materials that can be disposed of at a
local recycling centre.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
electrical devices.