background image

PFBS 12 B2

GB

IE

NI

CY

 5

 

4.  Power tool use and care

a)  

Do not force the power tool. Use the correct 
power tool for your application.

 The correct 

power tool will do the job better and safer at 
the rate for which it was designed.

b)  

Do not use the power tool if the switch does 
not turn it on and off.

 Any power tool that can-

not be controlled with the switch is dangerous 
and must be repaired.

c)  

Disconnect the plug from the power source 
and/or the battery pack from the power tool 
before making any adjustments, changing 
accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of 
starting the power tool accidentally.

d)  

Store idle power tools out of the reach of 
children and do not allow persons unfamiliar 
with the power tool or these instructions to 
operate the power tool.

 Power tools are 

dangerous in the hands of untrained users.

e)  

Maintain power tools. Check for misalignment 
or binding of moving parts, breakage of parts 
and any other condition that may affect the 
power tool’s operation. If damaged, have  
the power tool repaired before use.

 Many 

accidents are caused by poorly maintained 
power tools.

f)  

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting 
edges are less likely to bind and are easier to 
control.

g)  

Use the power tool, accessories and tool bits 
etc. in accordance with these instructions,  
taking into account the working conditions 
and the work to be performed.

 Use of the 

power tool for operations different from those 
intended could result in a hazardous situation.

5.  Use and handling of the cordless 

electrical power tool

a)  

Charge a rechargeable battery unit using 
only the charger recommended by the 
manufacturer.

 Chargers are often designed 

for a particular type of rechargeable battery 
unit. There is the danger of fire if other types of 
rechargeable battery units are used.

b)  

Only the rechargeable battery units supplied 
are to be used with an electrical power tool.

 

The use of other rechargeable battery units may 
lead to the danger of injury or fire.

c)  

When they are not being used, store 
rechargeable battery units away from paper-
clips, coins, keys, nails, screws or other small 
metal objects that could cause the contacts 
to be bridged.

 Short-circuiting the contacts of 

a rechargeable battery unit may result in heat 
damage or fire.

d)  

Fluids may leak out of rechargeable battery 
units if they are misused. If this happens, 
avoid contact with the fluid. If contact occurs, 
flush the affected area with water. Seek addi-
tional medical help if any of the fluid gets into 
your eyes.

 Escaping battery fluid may cause 

skin irritation or burns.

 

CAUTION! RISK OF EXPLOSION! 

Never charge non-rechargeable 
batteries.

 

 Protect the rechargeable battery from 

heat; for example, from continuous 
exposure to sunlight, fire, water and 
moisture. 

There is a risk of explosion.

6.  Service

a)  

Have your power tool serviced by a qualified 
repair person using only identical replace-
ment parts.

 This will ensure that the safety of 

the power tool is maintained.

Содержание 306948





















































Отзывы: