Parkside 304996, Перевод оригинальной инструкции

Страница: 6 / 34

PSBM 750 B2
GB
│
IE
│
NI
│
CY
│ 3 ■
Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Drilling in metal:
(Main handle): a
h,D
= 6 .190 m/s
2
, K = 1 .5 m/s
2
(Additional handle): a
h,D
= 5 .874 m/s 2 ,
K = 1 .5 m/s
2
Hammer drilling in concrete:
(Main handle): a
h,ID
= 10 .858 m/s 2 , K = 1 .5 m/s 2
(Additional handle): a
h,ID
= 10 .276 m/s 2 ,
K = 1 .5 m/s
2
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons . The
specified vibration emission value can also
be used to make an initial exposure estimate .
WARNING!
► The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions
in some cases .
Regular use of the power tool in this way may
cause the user to underestimate the vibration .
Try to keep the vibration loads as low as
possible . Measures to reduce the vibration
load are, e .g . wearing gloves and limiting the
working time . Wherein all states of operation
must be included (e .g . times when the power
tool is switched off and times where the
power tool is switched on but running without
load) .
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings and all instructions .
Failure to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury .
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-
operated (cordless) power tool .
1 . Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes .
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control .
IB_304996_PSBM750B2_LB6-.indb 3 09.07.18 17:17