Parkside 303564, Перевод оригинальной инструкции, Страница: 9 / 39

PEH 30 C3 GB
│
IE
│
NI
│
CY
│
5 ■
g) Use the power tool, accessories and ac-
cessory tools etc. in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations.
5. Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of
the power tool is maintained.
Appliance-specific safety instructions
for power planers
■
Wait until the cutter block comes to a com-
plete standstill before putting down the pow-
er tool.
An exposed, rotating cutter block can
catch in the surface and cause a loss of control
which could result in serious injuries.
■ Hold the power tool by the insulated handles
as the cutter block can come into contact with
its own power cable.
Contact with a live wire
may make exposed metal parts of the power
tool live and could give the operator an electric
shock.
■ Fix and secure the workpiece to a sturdy
work surface using clamps or other methods.
If you hold the workpiece in your hands or
against your body only it will remain unstable,
and this can result in loss of control.
■ Do not insert your fingers into the chip ejector
. You can injure yourself on rotating parts!
■ Always switch the appliance on before apply-
ing it to the workpiece.
Otherwise, there is a
risk of kickback if the planing blade catches in
the workpiece.
■ The plane sole must lie flat on the work-
piece when working.
Otherwise, there is a risk
of injury due to the plane jamming.
■ Never plane over metal objects. The planing
blade/cutter block
could be damaged.
■ Materials containing asbestos may not be
processed.
Asbestos is a known carcinogen.
■ Dusts can be produced while working that
are hazardous to health, inflammable or
explosive.
Wear a dust mask and use a suit-
able dust/chip extractor. Some dusts are carci-
nogenic.
■ When working for extended periods of time
on wood and, in particular, materials that
produce dust which is hazardous to health,
connect the appliance to an appropriate
external dust extraction appliance. Do not
use the power planer if the battery is dam-
aged.
Damaged cables increase the risk of
electric shock.
■ Do not rest your hands next to or in front of
the appliance and the area being worked.
Otherwise, there is a risk of injury if you slip.
■
In case of danger, remove the plug from the
socket immediately.
■ Always remove the plug from the power socket
in event of danger, during work breaks, when
working on the appliance (e.g. when changing
planing blade).
■ Always route the power cord towards the
rear, away from the appliance.
■
Use only sharp planing blades.
■ Do not soak the materials or the area to be
worked with liquids containing solvents.
■ Avoid all contact with rotating parts.
■ Never use the appliance for other purposes
and only with original parts/accessories.
■ Hold the appliance firmly while working.
Ensure that your stance is secure and stable.
■ The appliance must always be kept clean,
dry and free from oil and grease.