PSBSA 20-Li B2
■
14
│
GB
│
IE
2 SPEED CORDLESS IMPACT DRILL
PSBSA 20-Li B2
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for screwing in and
removing screws as well as drilling in wood, metal,
ceramic and plastic and impact drilling in bricks
and masonry. It is not suitable for impact drilling
in natural stone such as granite. The light on this
appliance is intended to illuminate the immediate
work area of the appliance.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
Features
Speed selector
Rotation direction switch/lock
ON/OFF switch / Speed control
Bit
Battery charge level button
Battery display LED
Battery pack*
Release button for the battery pack
LED work light
Additional handle
Chuck
Torque preselection ring
High-speed charger*
Red charge control LED
Green charge control LED
Package contents
1 2 speed cordless impact drill PSBSA 20-Li B2
1 additional handle
2 bits PZ1 & PZ2 (50mm)
1 carrying case
1 set of operating instructions
Technical data
2 speed cordless impact drill: PSBSA 20-Li B2
Rated voltage:
20 V
(DC)
Gearbox:
2 speed gearbox
Rated idle speed:
1st gear: n
0
0–440 rpm
2nd gear: n
0
0–1650 rpm
Hammer frequency:
0–26400 bpm
Max. torque:
45 Nm
Torque levels:
1–20 + 1 drill level /
+ 1 hammer level
Chuck capacity:
:
Ø max. 13 mm
Max. drill diameter:
30 mm for wood
15 mm for tiles
13 mm for steel
Battery: PAP 20 A1*
Type:
LITHIUM
ION
Rated voltage:
20 V
(DC)
Capacity:
2
Ah
Cells: 5
High-speed charger: PLG 20 A1*
INPUT:
Rated voltage:
230–240 V ~, 50 Hz
(AC)
Rated power
consumption:
65
W
Fuse (internal):
3.15 A
T3.15A
OUTPUT:
Rated voltage:
21.5 V
(DC)
Rated current:
2.4 A
Charging time:
approx. 60 min
Protection class:
II / (double insulation)
*BATTERY AND CHARGER ARE NOT INCLUDED
Содержание 301855
Страница 3: ...A...
Страница 66: ...PSBSA 20 Li B2 62 PL...
