Parkside 300595, Инструкции по эксплуатации и безопасности

Страница: 83 / 113

83 GB/MT
Assembly
It is recommended that you always carry out
work with another person.
Push the flux-cored wire through the wire outlet
26
(see Fig. J).
Lead the wire along the feed roller
29
and
then push it into the cable assembly intake
31
(see Fig. K).
Pivot the pressing roller unit
28
in the direction
of the feed roller
29
(see Fig. L).
Mount the adjusting knob
27
(see Fig. L).
Adjust the counter-pressure using the adjusting
knob in such a way that the welding wire sits
tightly between the pressing roller and the feed
roller
29
in the upper duct without being
squashed (see Fig. L).
Switch the welding unit on using the main
switch
5
.
Press the burner button
12
.
Now the wire feeder system will push the weld-
ing wire through the cable assembly
13
and
the burner
11
.
As soon as the wire protrudes 1 – 2 cm from
the torch neck
32
you can release the burner
button
12
once more (see Fig. M).
291492_Fuelldraht-Schweißgeraet PFDS 33 B2_content_IT_PT.indd 61 27.03.17 14:01