Parkside Performance PWSAP 20-Li C3, Инструкции по эксплуатации и безопасности

Страница: 55 / 259

54 GB/IE
m
CAUTION! RISK OF INJURY!
u
Only use accessory tools recommended by
the manufacturer. Using other accessory
tools and other accessories can represent a
risk of injury for you.
u
Only use accessory tools, which bear
information about the manufacturer, type of
binding, dimension and permitted number
of revolutions.
u
Only use accessory tools where the printed
rotational speed is at least as high as what
has been specified on the product marking.
u
Do not use any broken, cracked, or
otherwise damaged accessories.
u
Only use flawless accessory tools.
u
Ensure that the accessory tool dimensions
match those of the product.
u
Never re-drill a locating hole which is too
small to make it larger.
u
Never use separate bushings or adaptors
in order to make discs with a hole that is
too large fit the product.
u
Support plates or workpieces to reduce the
risk of kickback from a jammed disc. Large
workpieces may bend under their own
weight. The workpiece must be supported
on both sides of the disc, near the disc as
well as at the edge.
Release the locking flange
[ ]
: Press and hold
the spindle lock button
[ 1]
. Lift up and rotate
the tightening tab in a counter-clockwise
direction. Release the spindle lock button
(Fig. G).
Remove the locking flange
[ ]
.
If applicable, remove the current accessory
tool.
Mount the desired accessory tool onto the
backing flange
[ ]
(Fig. H).
Press and hold the spindle lock button
[ 1]
.
Lift up the tightening tab. Thread the locking
flange
[ ]
in a clockwise direction. Use
the tightening tab to tighten the accessory
tool securely. Push down the tightening tab.
Release the spindle lock button.
˜
Switching on and off
m
CAUTION! RISK OF INJURY!
Always wear protective gloves when
handling or working with the product.
K