PARKSAFEAUTOMOTIVE.COM
2
CONTENTS
-
Camera with
1
m cable to
mini male 6 pin
connector
-
1m
camera
connect
ion cable with mini female 6 pin connector and RCA
female connector
-
6m Male to Male RCA extension cable
-
18
mm hole saw
-
Instructions
INSTALLATION
1.
Connect the Black wire to a suitable ground and the Red wire to a s12V
supply.
2.
If the camera is to be used in the rear of the vehicle, the Red wire should be connected
to the reversing light circuit or an interface which provides a reverse signal.
3.
Select a suitable location for the camera and ensure that the area is free from all cables,
fuel & oil. Whenever possible, avoid locations that are subject to road dirt & water spray.
4.
Aim to mount the camera preferably 45-60cm from the ground and cut a suitable hole
using the cutting tool provided.
5.
Using the supplied video cable, connect the camera to the display screen and ensure
that the image is displayed correctly.
6. To swap the image from mirror to normal view, cut the small white loop wire which is
located on the camera connection cable.
7. To remove the parking line feature, cut the small blue looped wire which is located on
the camera connection cable.
