Parkmate RVM-073A Скачать руководство пользователя страница 11

11

Left / Right Side Cameras

When installed correctly the 

RVM-073A 

can display the video feed from a side 
camera when the corresponding indicator 
is activated.  When activated the side view 
video feed will be displayed on screen until 
the indicator has been disengaged.

PRECAUTIONS FOR USE OF MIRROR MONITOR

1.  

The Mirror monitor is made of glass. Avoid dropping the 

RVM-073A

 mirror monitor from any height or 

subjecting the device to impact or shock.

2.  

Do not apply excessive force to the mirrored or monitor surface as this may damage the screen causing 
colours to be displayed incorrectly.

3.  

Do not attempt to disassemble the mirror monitor. Doing so will void all warranties.

4.  

When cleaning the mirror monitor, spray glass cleaner onto a paper towel or micro fibre cloth. Do not 
spray glass cleaner directly onto the mirror monitor as this can result in damage to the internal circuitry.

SAFETY
1.  

The rear view mirror monitor is designed to provide visual assistance only. 

Please note

 that the video 

displayed on screen may differ to the actual conditions. It is recommended that the driver is always 
aware of their surroundings without solely relying on the rear view mirror monitor.

2. 

Do not use a rear view camera system with the vehicle’s tailgate open.

3.  

Objects under or around the bumper cannot be displayed as it is likely they will fall outside the viewable 
range of your rear view camera.

Содержание RVM-073A













Отзывы: