MOUNTING RING TUBES
Install both
Mounting Ring Tubes
.
Secure the
Support Ring
onto the base of
the adapter with the supplied set screws.
STABILIZER BARS
Install the
Landing Leg Stabilizer Bars
into the adapter’s
Ring Tubes
, ensuring
that the ends will attach to the
Outside
of the Trailer Legs
. Secure these with
the supplied
D Clips
.
BOLTS & WING NUTS
Point the
Stabilizer Bars
towards the trailer.
Lock them to the
Trailer’s Landing Legs
with the supplied
Bolts
and
Wing Nuts
.
Raise the Trailer Jack
.
LANDING LEG
STABILIZERS
WHEN CONNECTING
TO THE TRANSFORMER:
Once the trailer is close to level:
Drill a hole
into one side of the
Inner
Tube
, and then the other to complete
the
hrough hole
. Repeat with the other
Stabilizer Bar, then secure with
D-Pins
.
These holes only need to be drilled
on the first installation.
21
