ParkerVision WR1500 Скачать руководство пользователя страница 22

Страница: 22 / 177

WR1500

4-Port Wireless DSL/Cable Router

3.4.1 Wizard Setup - Ethernet - Continued

LABEL

DESCRIPTION

User Name

Type the username given to you by your ISP.

Password

Type the password associated with the username above.

Address

The WR1500 Wireless Router will ﬁ nd the Roadrunner Server IP if this ﬁ eld is left

blank. If it does not, then you must enter the authentication server IP address.

Type the domain name of the Telia login server, for example “logini .telia.com”.
This ﬁ eld is not available on all models.

Relogin Every(min)

(Telia Login only)

The Telia server logs the WR1500 Wireless Router out if the WR1500 Wireless

Router does not log in periodically. Type the number of minutes from 1 to 59 (30

recommended) for the WR1500 Wireless Router to wait between logins.

This ﬁ eld is not available on all models.

Click

Next

to proceed to the next page.

Back

Click Back to go back to the previous page.

3.4.2 PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data

from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-

based networks.

PPTP supports on-demand, multi-protocol, and virtual private networking over public networks,

such as the Internet.

Refer to the appendix for more information on PPTP.

The WR1500 Wireless Router supports one PPTP server connection at any given time.

Содержание WR1500


















































































































































































Результаты поиска

Содержание WR1500

Отзывы:

Бренды по названию

Популярные бренды

ParkerVision WR1500, Руководство пользователя

Результаты поиска

Содержание WR1500

Отзывы:

Бренды по названию

Популярные бренды