Page 10
CameraMan® 1-CCD Camera Control Keypad Operations Manual • © 1999 ParkerVision, Inc.
Operating Your Camera Control Keypad
To move quickly from view to view using the Camera Control Keypad, use the location preset function on the keypad. With location
presets, you can store and recall up to 99 pre-determined views by following these steps.
Working With Location Presets
What are Location Presets?
Location Presets are stored locations that can be recalled using the Camera Control
Keypad. Each Location Preset stores the following camera control settings:
• PAN/TILT position
• ZOOM perspective
• IMAGE setting
To Set or Change a Location Preset
1. Select the camera you want to program using the
CAMERA SELECT
buttons
(if you are using only one camera, press
CAMERA SELECT 1
).
2. Use
PAN/TILT arrows
to move the camera to the desired location.
3. If desired, use
ZOOM In/Out
to set the needed Zoom perspective.
4. If desired, use the manual
IMAGE
buttons to set the needed brightness.
5. Enter a
Location Preset
number (
1–99
).
6. Press and hold
ENTER
until you hear two beeps.
The two beeps indicate that the
Location Preset
has been stored.
To Recall a Location Preset
1. Select the camera (if only using one camera,
press
CAMERA SELECT 1
).
2. Enter the
Location Preset
number (
1–99
).
3. Press and release
ENTER
.
The CameraMan camera will move to the memorized location and recall the information
stored for that Location Preset.
Each CameraMan camera can store and recall up to
99 Location Presets
.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
