isysNet 24 VDC Input Modules, Series A (PSSN8M8A, PSSN8M12A, PSSN8M23A,PSSP8M8A, PSSP8M12A, PSSP8M23A) E106P
6
Add 24 VDC Input Modules to RSLogix 5000
I/O Configuration
To add your input modules to RSLogix 5000 I/O configuration, follow
these steps:
• In RSLogix 5000:
- For ControlNet, highlight the
PSSCCNA
or
1738-ACNR
(Shown)
, right click and select
New Module
.
- For EtherNet/IP, highlight the
PSSCENA
or
1738-AENT
(Shown),
right click and select
New Module
.
Communicate With Your Module
I/O messages are sent to (consumed) and received from (produced)
the I/O modules. These messages are mapped into the processor’s
memory. These I/O input modules produce 1 byte of input data
(scanner Rx - status). They do not consume I/O data (scanner Tx).
Default Data Map for the Input Modules
PSSN8M8A, PSSN8M12A, PSSN8M23A,
PSSP8M8A, PSSP8M12A, PSSP8M23A
Message Size: 1 Byte
7
6
5
4
3
2
1
0
Produces
(Scanner Rx)
Ch7 Ch6 Ch5 Ch4 Ch3 Ch2 Ch1 Ch0
Channel
Status
Where: 0 = OFF, 1 = ON
EDS File Requirements
The EDS files are available online at www.parker.com/pneu/isysNet.
If your RSLogic 5000 is Version 15.X or greater:
• Choose the
PSSN8M8A
module from the list of Parker
modules.
• Enter a name and click OK.
• Notice that the PSSN8M8A is now under the I/O configuration.
