Parker PPLM-21196, Руководство пользователя, Страница: 8 / 32

14 15
ASSEMBLY
ASSEMBLY
Align the locating pin on the mower frame with the
upper hole in the lower handle.
1
LOWER HANDLE ASSEMBLY
To adjust the handle angle pivot the lower handle
on the locating pins. There is a choice of 3 angles
to set the handle to, HIGH, MID & LOW. Set at an
angle that is most comfortable for the user.
3
ADJUST HANDLE ANGLE
Locate the lower handle on to the locating pin
on the mower frame. This process will need to be
repeated on both sides of the handle.
2
LOCATE HANDLE ON TO PIN
Align the lower round hole located on the lower
handle with one of the square holes on themower
frame.
4
ALIGN HANDLE WITH FRAME
Tighten the red locking knob on to the bolt by
turning it in a clockwise direction. Tighten until the
lower handle is secured in place. This process will
need to be repeated on both sides of the handle.
6
SECURE LOCKING KNOB
Thread the bolt through the square hole in the
mower frame and through the lower round hole
on the lower handle. Slide the washer on to the
bolt and up against the lower handle followed by
the red locking knob.
5
THREAD LOCKING KNOB
LOW
MID
HIGH
WARNING: Do Not operate the machine with a loose handle, ensure that the lower handle is fully secured in place before commencing use. NOTE: The handle angle must be adjusted correctly to suit the user, this will ensure that use of the mower is as comfortable as possible.