Parker PPLM-17132, Руководство пользователя

Страница: 11 / 25

20 21
ENGINE STARTING PROCEDURE
CAUTION! Be aware using the primer too many times will cause the engine to flood.
NOTE: If the engine fails to start after three pulls, repeat the process.
NOTE: If the engine stops due to a lack of petrol, refill and press down the primer 3-5 times.
ENGINE STARTING PROCEDURE
PRIMING THE ENGINE
Before attempting to start the engine set the deck height
to the highest setting. This will prevent the blade from
catching on any uneven ground and make the machine
much easier to start. When starting a cold engine, press the Primer bubble fully
3-5 times. When the engine is warm the engine does not
need to be primed.
SET DECK HEIGHT
1 2
SECURING THE STARTER ROPE
Stand behind the mower, pull the engine Start/Stop lever
toward the upper handle. Place your other hand on the
starter handle, pull the starter handle out approx. 10-15cm
until you feel a resistance and then start the Engine with
a sharp pull. Once the engine is running, put the starter rope Into the
rope guide
START/STOP LEVER
3 4
STARTER
ROPE
ROPE
GUIDE
PRESS X 3-5
WARNING: If the engine won’t start after you have operated the starter several times, the engine may
be flooded with excess fuel. Please follow the flooded engine proceedure on pages 22 & 23.