Parker Phastite PH-4-PS, Руководство по установке

Страница: 5 / 35

7
WARNING: Failure or improper use of the Phastool
®
, including its hose, fittings, assemblies or related accessories
can cause death, personal injury and property damage. Possible consequences of failure from improper selection or
improper use of these products include but are not limited to:
• Fittings thrown off at high speed.
• High velocity fluid discharge.
• Explosion or burning of the conveyed fluid.
• Electrocution from high voltage electric power lines.
• Contact with suddenly moving or falling objects that are controlled by the conveyed fluid.
• Injections by high-pressure fluid discharge.
• Dangerously whipping hose. Hose arresters have been installed to keep operators and job sites safe.
• Contact with conveyed fluids that may be hot, cold, toxic or otherwise injurious.
• Sparking or explosion caused by static electricity build up or other sources of electricity.
• Injuries resulting from inhalation, ingestion or exposure to fluids.
BEFORE USING THESE PRODUCTS, IT IS IMPORTANT THAT YOU READ AND FOLLOW THE INSTRUCTIONS
BELOW.
General Instructions
Scope
This safety guide provides instructions for selecting and using (including assembling, installing, and maintaining)
these products. For convenience, the assembly tool including the hydraulic cylinder is called the “tool”. The assembly
made with hose and crimped on connectors is called the “Hose Assembly”. All products commonly called “fittings”
or “couplings” are called “connectors”. All jaw inserts are called “inserts”. All related accessories are called “Related
Accessories”. The complete assembly tool including but not limited to connectors and hose assembly is called the
“tool assembly”. The system used to generate the hydraulic power for the tool assembly is called “the pump”.
Fail-Safe
Hose Assemblies and related connectors can and do fail without warning for many reasons. Design all systems and
equipment in a fail-safe mode, so that failure of the Hose Assembly or Connector will not endanger persons or property.
Parker provides a hose guard to protect the operator against hose burst. The hose connections are connected to the
tool and pump with the use of a protective sleeve to avoid hose fitting disconnection. Detailed information is given in
the Tool Assembly Section of this document.
Distribution
Provide a copy of this safety guide to each person that is responsible for selecting or using any aspect of the tool
assembly. Do not select or use the tool assembly without thoroughly reading and understanding this installation
manual.
User Responsibility
Due to the wide variety of operating conditions and applications for the tool assembly, this safety guide does not
analyze all technical parametres that must be considered when using the tool assembly. The user, through their own
analysis and testing, is solely responsible for:
• Assuring the requirements are met and the application presents no health or safety hazards.
• Ensuring all appropriate health and safety warnings on the equipment are legible and not damaged / removed.
• Assuring compliance with all applicable government and industry standards.
Additional Questions
Call the appropriate Parker technical service department if you have any questions or require any additional
information. Call 1-800-CPARKER, or go to www.parker.com, for telephone numbers of the appropriate technical
service department.
Safety and General Maintenance