13
14
Parker Hannifin Corporation
|
Pump & Motor Division
|
Kings Mountain, NC
Parker Hannifin Corporation
|
Pump & Motor Division
|
Kings Mountain, NC
WARNING:
This product can expose you to chemicals including lead or DEHP which are known to the state of California to cause cancer,
birth defects, and other reproductive harm. www.p65warnings.ca.gov
WARNING:
This product can expose you to chemicals including lead or DEHP which are known to the state of California to cause cancer,
birth defects, and other reproductive harm. www.p65warnings.ca.gov
Catalog HY13-PMD500-SM/US
PGP/PGM 500 Series
Gear Pumps & Motors Service Manual
Assembly Instructions
Figure 9
Figure 10
Figure 11
9)
Re-affix or replace section seal (
Fig. 11
). Verify both
sides of the section seal are free of debris. If need
to replace, grease the new section seal and insert
firmly into the grooves in both sides of the gear
housing.
Figure 8
8)
Mount shaft end cover facing down in a vise
(
Fig. 10
).
7)
Assemble the snap ring (
Fig. 8 & 9
). Using snap ring
plyers, seat new snap ring on top of bearing and lip
seal.
