Parker MSR Series Скачать руководство пользователя страница 7

Страница: 7 / 26

User Information Guide

WWW.PARKERMOTION.COM

PH: (724)

861

8200

Warnings and Precautions

Hot Surfaces

DO NOT touch motor coils located in the positioner after high duty operation. Motor temperature may

approach 60°C. The unit itself may become warm or hot to the touch.

Electrical Shock

DO NOT take apart or touch any internal components of the positioner while unit is plugged into an elec-

trical outlet. SHUT OFF power before replacing components to avoid electrical shock.

High Magnetic Field

Unit may be HAZARDOUS to people with Pace Makers or any other

‘

magnetically

sensitive

’

medical de-

vices. Unit may have an effect on

‘

magnetically

sensitive

’

applications.

Ferrous Materials

The positioner will NOT keep out small ferrous materials in applications with air born metallic particles.

The customer must take additional precautions in these applications to prevent intrusion of these ferrous

particles.

Vertical Operation

Depending upon your load and counter balance selection the carriage and load may drop when mounted

vertically in power loss situations potentially causing product damage or personal injury.

General Safety

Because linear motors can accelerate up to 3 g's and operate at high speeds, and sometimes positioners

move without warning, keep all personnel away from dynamic travel range of positioner. Product does

have pinch areas where moving elements relative to each other come together.

Moving Cables

If the cables are to be moving, the use of high flex cabling is recommended to ensure long life .

Strain Relieve Electrical Components

All electrical components (such as motor, halls, encoders and limit/home switches) must be strain re-

lieved. Failure to strain relieve electrical wires or cables may result in component failure and/or possible

personal injury.

Pinch Points

Unit may have a pinch point because the top extends over the base of the table as well as moving ele-

ments relative to stationary elements. Proper care should be exercised.

Содержание MSR Series



























Результаты поиска

Содержание MSR Series

Отзывы:

Бренды по названию

Популярные бренды

Parker MSR Series, Руководство пользователя

Результаты поиска

Содержание MSR Series

Отзывы:

Бренды по названию

Популярные бренды