
UM1004 | MRO-00011 05/21 Rev.0 DCO-016875
10
10.2 Special Tools
Specialized tools are used to assist in the assembly of the Isolator and are provided directly from LORD. These tools are
shown in Table 11.
Table 11: Special Tools
Tool Number
Tool Description
Service Level
FAS-60530
T-Seal Funnel
Level I, Level II
FAS-61430
Torque Wrench Adapter
Special Cases
FAS-60530 is a funnel used to install the T-Seals.
Figure 8: FAS-60530 T-Seal Funnel
FAS-61430 is a torque wrench adapter used to install and/or remove the nut from the Sealing Sub Assembly, which is
only required if the ceramic insert requires replacing.
Figure 9: FAS-61430 Torque Wrench Adapter
11.0 SERVICE INSTRUCTIONS
This section provides detailed instructions on assembling, disassembling, and servicing the Isolator. Included are
photographs depicting these processes.
11.1 Service Levels
11.1.1 Level I Service
Level I Service includes:
• Replacing O-Rings on the Sealing Sub Assembly (-125 and -127 O-Rings)
• Axial Redress Kit [J-28460-68]
o Replacing the two (2) T-Seals [J-28460-36]
o Replacing the Threaded Seal Piston (TSP) [Y-63700-58-1]
o Replace the six (6) Dowel Pins [J-28460-66]
o Replacing Guide Band, PEEK [Y-63700-138-2]
o Replacing Guide Band, PEEK [Y-63700-164-1]
Purchase Axial Redress Kit [J-28460-68] to perform Level I Service.
11.1.2 Level II Service
Level II Service includes:
• Replacing O-Rings on the Sealing Sub Assembly (-125 and -127 O-Rings)
• Axial Redress Kit [J-28460-68]
o Replacing the two (2) T-Seals [J-28460-36]
o Replacing the Threaded Seal Piston (TSP) [Y-63700-58-1]
o Replace the six (6) Dowel Pins [J-28460-66]
o Replacing Guide Band, PEEK [Y-63700-138-2]
o Replacing Guide Band, PEEK [Y-63700-164-1]
• Axial Elastomer Kit [J-28460-34]
o Replace the Elastomer Package (four (4) compression stacks [J-28348-53] and two (2) rebound stacks [J-28348-
45])