Parker K-MT 10-95, Руководство по эксплуатации

Страница: 22 / 60

22 K-MT10-95_EN_02
Dewpoint-sensing control
With a dewpoint-sensing control system, you can operate the dryer in fixed or
variable cycles. In the fixed cycle, switchover is effected after a fixed time period
(usually after 5 minutes). In the variable cycle, the switchover is effected in
relation to the dew point reached and the charging of the drying agent . The
adsorption time in the variable cycle amounts to 60 minutes maximum.
Fine filter muffler
A fine filter muffler is used to reduce the noise emission of the dryer to lower
levels than the standard muffler can provide. If installed, the fine filter muffler
replaces the original installed muffler.
Nozzle kit
In the case that the operating pressure deviates from the standard design
pressure (7bar
e
) it is possible that the amount of necessary regeneration air
changes. This effect may have a negative impact on the cost-effectiveness of the
dryer. To prevent this, it is possible to replace the built in regeneration air nozzle
by a nozzle with a modified bore. This replacement optimizes the regeneration air
consumption and therefore restores the energy efficiency of the dryer. To receive
more information on this conversion, please contact the manufacturer.