11
Mounting the IQAN-G2
5 Mounting
Instruction book, IQAN- G2
5
Mounting
Mounting the IQAN-G2
The IQAN-G2 does not have to be mounted in any specific orientation. 2 fastening
methods, of end mounting with 2 bolts, or flat mounting with 4 screws is acceptable.
N
OTICE
The IQAN-G2 module should be mounted according to the following instructions:
•
Locate the module eliminating the risk for the cabling to be folded, crushed or dam-
aged in any way. Ensure the cabling cannot pull, twist or induce sideload on the con-
nectors.
•
Locate the module so that physical impact is avoided.
•
Locate the module so that air can circulate to eliminate excess heat. Ensure that no
external heat, e.g. from the engine or heater, is transferred to the module.
•
Locate the module to protect it from pressure washing and water directly spraying
on the connector or similar.
•
Locate the module so the LEDs are visible.
Approved fastening methods of the IQAN-G2.
N
OTICE
The IQAN-G2 module must not be placed in any marine related or similar continuously
damp environment without external protection.
